Faux Snow Cone Party Garland

DIY Faux Snow Cone Party Garland & Gift Embellishment

daqui

As soon as the snow cone shack in our neighborhood opens up, we know that Summer is officially here! The bright candy colors and the sparkle of glittery ice makes the eyes light up of both young and young-at-heart! What better way to capture the essence of summertime fun and bring it indoors, than with this sweet DIY Faux Snow Cone Garland and Gift Embellishment. Bonus: these ones won't melt everywhere!
Follow below for the simple steps. This would also be a fun project to do with kids...they will have a blast mixing up the paint and pouring on the glitter (just be sure to give little ones a hand with the glue gun). Enjoy!


DIY Garland - Supplies needed:

• Styrofoam Balls (craft store) — 1.5" or 2" (I used 1.5") You will need at least 8 for a small garland.
• Acrylic Paint in any colors you'd like (craft store)
• Paint brushes (craft store) — you will need one for each color of paint
• Clear Glitter (Michael's craft store) — I used the Martha Stewart Crafts™ Tinsel Glitter in Crystal, and it looks just like shaved ice). I highly recommend it for this particular DIY.
• Scissors
• White Cardstock Paper (office supply store)
• Paper Cone Template (Includes templates for both 1.5" and 2" cones. Download will begin as soon as you click on the link)
• Low heat hot glue gun (craft store) — low heat is very important for this project, or you will likely burn yourself)
• Twine
• Bamboo skewers (grocery store)— optional, but very helpful and highly recommended
• Scrap paper
• Tall mug or cup

Steps 1 and 2
1. Pierce each Styrofoam ball with a bamboo skewer and set aside. This will give you something to hold onto while working, and will also allow for faster/cleaner drying time.
2. Apply a small amount of paint to the top of one prepared Styrofoam ball. You can add more as needed, so for less waste and mess, start with just a little.

Steps 3 and 4
3. Use a paintbrush to coat the top 2/3 of your ball. You don't need to cover the bottom 1/3 because it will be hidden inside the paper cone.
4. Glitter! Generously sprinkle your tinsel glitter all over the painted surface of your ball. Tip: work over a piece of a scrap paper so that you can capture the excess and pour it back into the bottle when you are finished. Tap off loose glitter.

This is where the skewers really come in handy. As you work place each finished ball into a tall cup to help them dry quickly and without any mess. Repeat steps 1-4 with all blank Styrofoam balls using whatever paint colors / variation that you'd like. While they dry, you can work on the second half of your project.

Steps 5 + 6
5. Print and cut out the paper cone template (provided above). Be sure to use the proper template for the Styrofoam ball size that you are working with. Place your template on top of a piece of cardstock and cut around the template. Cut out as many paper cone shapes as Styrofoam balls that you used.
6. Gently curl the outside ends in towards each other until the slightly shorter edge overlaps the opposite edge. Doing this before adding the glue makes it much easier to work with.

Steps 7 + 8
7. Apply a small line of hot glue to the inside edge (the slightly shorter edge) and curl it around once more until it overlaps the opposite edge, forming a cone. Make sure that the glue seals all the way down the full length of the cone.

Steps 9 + 10
9. If there is any excess paper sticking out at the seam, you can snip it off with your scissors.
10. Be sure your Styrofoam balls are dry and have been removed from the skewers before moving onto this step. Apply a small amount of glue to the top inside portion of your paper cone and quickly place a ball inside (make sure the non-painted side is facing down). Gently press down on the ball to make sure that the glue adheres to it.

And now you have an adorable faux snow cone! Assemble all remaining balls and paper cones and set aside.

Don't they look so pretty!

Steps 11 and 12
11. To complete your garland, apply a small droplet of hot glue to the very top of a prepared snow cone.
12. Place your twine into the middle of the hot glue dot and let the glue set for a moment. Tip: Be sure to leave enough room at the end of your twine for hanging purposes. Repeat with remaining snow cones, spacing them as far apart from one another, and in whatever color pattern you'd like.


Hang your garland with pride!

You can also use individual snow cones to decorate gifts. Don't they look adorable!

Follow the steps above to create your snow cone, and then add a name onto the paper cone before folding it and attaching it to the foam ball.

To make it easy to attach to a gift you can either:
1. Use a pair of wire cutters to snip off the end of a paper clip. Insert the U-shaped wire into the top of your snow cone and it's ready to use (this would also be a great way to turn these into holiday ornaments).
2. Knot a small piece of twine leaving a small loop at the end. Snip off the two loose pieces of twine beneath the knot. Apply a small amount of glue to the top of your snow cone and place the knotted end of your twine into it. To secure it in place, use the point of a bamboo skewer to gently press the knot down into the top of the snow cone.

You can use your snow cones as place cards too. Just add your guest's names onto the cones and leave off the hook/loop at the top. Easy peasy!

Uma cidade para a L - Daqui www.ikatbag.com

Christmas Origami Tutorial - Daqui: thelastpiece.typepad.com

I mean who wouldn't, right? My friend Peta showed everyone in my Wednesday night class how to do this a few weeks ago. You won't believe how easy it is, my 11 year old made this one for his teacher for Christmas.

You will need an old book or some old sheet music (or any paper suitable for origami), a piece of string or ribbon to hang it with, and a hot glue gun.

First, cut the book apart, this is easiest using using your rotary cutter. Cut the pages into squares. I used 3 1/2" squares, which resulted in a ball about 6" in diameter.

Take a square and fold it in half on one diagonal.

Fold an outside corner up to meet the top corner.

Repeat with the other side.

Open the fold up along one side and press it open and flat. Fold the top of the corner back.

Repeat with the other side.

Fold the sides in half to form a square again.

Make 6!

Next, run some hot glue down the outside of one of the squares. Turn the other edge around to meet it and press gently, so you don't make a crease. This is one petal. Make 6.

When you have 6 petals, run the glue gun down the side of one petal, and stick another one to it, matching the creases and the bottom points. Make 3 pairs.

Run the glue gun down the side of one of the pairs and stick another one to it.

To complete the flower, run the glue gun down both side of the last pair of petals and press them into the other two pairs. Make sure that the points all meet at the bottom.

This is a completed flower. I made 12 flowers to fit into the ball. I should have taken pics of the flowers being stuck together but I didn't - however you will find that they fit together between the flowers like a puzzle, and as long as you match the points of the flowers up they will make a ball very easily.

Before you glue the last flower in, run some glue along the side from the middle out and add a piece of ribbon or string to hand thte ball from, then glue the last flower in. These are a little time consuming but totally worth it!

And THEN I thought, why wait for Christmas? These would look glorious all over the house, maybe filling a wooden bowl, or just one somewhere special..... enjoy

Do site Sincerely, Jules