Do site www.craftpassion.com - Girl Shorts

Material:
1. Cotton fabric, 3/4 yard or a woman short-sleeve blouse (at least a USA size 10 or UK size 12)
2. Cotton fabric, coordinating print or color, fat quarter
3. Ribbon, short length

Tools:
1. Sewing machine with matching thread
2. Serger/overlock machine or zigzag stitch
3. Printer, letter size (8.5″ x 11″) paper 2 pcs. & glue
4. Pencil & ruler
5. Carbon and tracing wheel
6. Scissors
7. Sewing kits
8. Iron
9. Safety pin

[Note: If you have missed the basic kid shorts sewing pattern & tutorial, click here to go to the post and download the free sewing pattern. For younger kid / toddler size, click here for the post to download.]

Download this tie hem variation pattern in pdf document and print it with your inkjet printer. Download & print the kids shorts sewing pattern too if you haven’t have the copy from the recent tutorial.
Feed the letter size paper into your printer and print the patten without setting any scale on the printing.
Or, draw your own by referring the pattern.
Cut the paper pattern out.
{the pdf download will either open in new tab or open a small window asking you to save it as file. If you can’t find the saved file in your computer, the default folder usually is in “/downloads”}
{If you can’t download the pdf pattern, probably you don’t have acrobat reader, download the latest version for free, here.}

Shorten the front of the original shorts pattern by 1 1/4″ from hem. Repeat the same to the back.
Place the tie-hem pattern onto the new shorts length, align the side seams, don’t glue.
Tear or cut vertically on the swirl line on the tie hem pattern (shorts side) to split the tie side and shorts side.
Move the shorts side to align with the inseam.
Glue a piece of paper in between, draw with pencil and ruler to extend the seam lines and seam allowance lines.
Repeat the same to the back pattern.
Cut both tie hem with the shorts fabric and a coordinating fabric, 1 of each side. You will end up with 8 strips altogether.
Sew the pockets and join the front and back of the shorts at the side seam. Mock flat fell on the side seam.
Cut 2 curve notch patterns from the same fabric as the shorts.
Over-lock stitch or zig-zag stitch on the outer edge of the curve notch.
Place a curve notch on the right side of the shorts, align the center to the side seam and both hem lines.
Sew on the inner curve and trim the seam allowance to around 1/8″.
Turn the notch curve to the wrong side of the shorts. Press and top stitch around 1/4″ from the curve.
Repeat the same to the other side seam.
Continue sewing the inseam and center seam of the shorts.
Either sew the elastic band now or after installing the tie hem band.
Join the front-back pair of the tie hem on the vertical edge (inseam of the shorts).
Sew the matching pair with right side facing each other, a little away from the notch marking, sew to the end, then go down diagonally, then to the bottom hem all the way to the other side, go up diagonally, then upper horizontally until you almost reach the notch marking.
Remember to back stitch a few stitches at the beginning and at the end of the sewing.
Clip corners on the seam allowance.
Align and pin the front tie hem’s notch marking with the shorts hem. Marking to marking.
Sew the front tie hem to the shorts, leave out the back portion to later step.
Turn the tie hem right side out and adjust the corners. Press with warm iron.
Either stitch in the ditch or hand slip stitch the back tie hem to the shorts.
Top stitch near the edge, around.
Repeat the tie hem attachment steps to the other side.
Embellish the shorts with your girl’s favorite iron on embroidery patch.
Sew the waist band and the ribbon if you haven’t done so.
~~ DONE ~~